Stone waterfall island, full-height backsplash and dark kitchen cabinets in a completed LeviArs remodel

Materials · design coordination · installation

Countertops in Kirkland & Greater Seattle

The surface that brings your room together.

LeviArs Design & Remodeling helps homeowners compare countertop materials and coordinate surfaces with cabinetry, sinks, backsplashes and flooring. Material choice should consider appearance, edge profile, maintenance, seams, thickness, support and how the surface will be used.

Waterfall island and full-height backsplash in a completed LeviArs kitchen

Service at a glance

Kitchen & bathroom countertops by LeviArs

Material and slab selection, Edges, backsplash and waterfall details, Template, fabrication and installation coordination. Confirm the included work, selections and responsibilities in your written proposal.

Primary scope
Material and slab selection, Edges, backsplash and waterfall details, Template, fabrication and installation coordination
Service area
King County and Snohomish County, Washington
Project delivery
One coordinated design-and-build process
First step
Consultation, site review and project priorities

Countertops for Kitchens and Bathrooms

Quartz, granite, quartzite, porcelain and other natural stone are not interchangeable. Care, fabrication requirements and product performance depend on the specific material selected.

Material and Finish Selection

Compare the actual slab or product sample with cabinetry and surrounding finishes. Pattern, color variation, care requirements and approved uses differ between quartz, natural stone and porcelain selections. Confirm the exact material and availability before planning quantities or fabrication.

Edge, Color and Surface Considerations

Confirm dimensions, overhangs, sink type, faucet holes and other cutouts alongside edge and backsplash details. Resolve supports and junctions with cabinetry before fabrication.

Coordinating Countertops with Cabinets and Tile

Coordinate countertop thickness, edge details and backsplash junctions with the cabinet plan. Review sink placement, faucet clearance, supporting cabinets and nearby tile. A sample comparison helps make the connections between surfaces clear before measurements and final approvals.

Selection and Project Process

Final measuring follows cabinet readiness and actual site conditions. Confirm that cabinets and supports are ready, then coordinate templating, fabrication and installation for the selected material.

Areas We Serve

Our Kirkland Design Center helps homeowners across King and Snohomish Counties compare countertops for kitchens, bathrooms and coordinated renovations. Contact LeviArs with the room details and chosen materials to discuss the next step.

Start with the whole room

A considered surface.
A connected design.

At the LeviArs Kirkland Design Center, compare countertop direction alongside cabinet colors, tile, flooring and lighting. We help homeowners in Kirkland, Bellevue and Seattle narrow the material and finish before the details move into a measured plan.

Countertop replacement starts with the cabinets beneath it and the way the surface will be used. Compare quartz, granite, quartzite, marble and porcelain, then review slab layout, seams, edges, sink cutouts and support requirements. LeviArs coordinates selection with the fabrication and installation scope so the countertop, backsplash and adjoining finishes are planned together.

Understand the material

Similar looks.
Different surfaces.

Start with the actual material, then compare color, veining and finish. A marble-inspired pattern does not make a product natural marble.

Quartz & engineered surfaces

Compare the exact manufacturer’s composition, finish and care instructions. Engineered designs can resemble marble, quartzite or concrete while remaining a different material. Review a physical sample and the complete slab pattern.

Granite

Natural mineral patterns vary from slab to slab. Consider the specific stone, finish and edge detail, and review the selected slab before approving fabrication. Sealing and care depend on that selection.

Quartzite

A natural stone distinct from manufactured quartz. Compare the actual slab’s veining, fissures and finish, then confirm fabrication requirements and a suitable care plan for the selected stone.

Marble & dolomite

Expressive natural veining with care requirements that deserve attention before selection. Discuss etching, staining, finishes and the character that develops with use, especially around kitchen work areas.

Porcelain slabs

Large-format manufactured panels with stone-inspired and other designs. Plan the selected thickness, support, edges, cutouts and vein direction with the fabricator; slab requirements differ from ordinary tile installation.

Other natural stone

Explore supplier-listed soapstone, travertine, limestone, onyx, slate or basalt where appropriate. Each stone has different properties and application limits; availability and suitability are confirmed for your project.

Manufacturer collections

Find your countertop direction.

Browse by company and its material categories. Confirm the exact product, finish, thickness and availability with LeviArs before ordering.

Choose a manufacturer

Product names and categories follow the manufacturer’s catalog. Photos are material references; confirm physical samples, actual slabs and current availability with LeviArs.

Cambria · Quartz · Hawksmoore™

Cambria: 1 selection

Choose another manufacturer ↑

Know your selection

Cambria · Quartz

Cambria quartz combines distinctive slab designs with a nonabsorbent, stain-resistant surface that is easy to clean. The range is American made, with a transferable Full Lifetime Warranty subject to the manufacturer’s terms.

  • Nonabsorbent quartz surface
  • Stain resistance and straightforward cleaning
  • Transferable Full Lifetime Warranty, subject to its terms

Plan the complete surface

Details that shape the result.

The material is one decision. Edge profiles, supports, joints and adjoining finishes complete the plan.

Veined waterfall island countertop with an inset sink and adjoining kitchen work surfaces in a LeviArs remodel

Carry the pattern through the room.

Review the island, vertical ends and backsplash together. The approved layout determines how the pattern moves across each surface and where joints appear.

Coordinate kitchen cabinets →

Edge profiles

Choose a profile suited to the material, thickness and room. Eased, beveled, rounded and built-up or mitered details are reviewed with the fabricator before approval.

Thickness & support

Use the selected product’s actual specification. Overhangs, spans, cabinets, brackets and cutouts determine the support and installation details; one thickness rule does not cover every material.

Waterfall ends

Plan how the top meets the vertical panel. Review veining, joints, edge construction, cabinet clearance and the extra slab area required before fabrication.

Full-height backsplash

Coordinate the backsplash with windows, outlets, upper cabinets and the range. Review slab layout and seams together with the countertop.

Kitchen work surfaces

Confirm the island, perimeter counters, sink, faucet and appliance openings as one measured layout. The finished cabinet installation must support the agreed plan.

Bathroom vanity tops

Coordinate basin style, faucet holes, splash height and usable counter space. Confirm wall conditions, cabinet dimensions and access before templating.

From sample to finished surface

Our countertop process.

Your written scope connects selection, supplier coordination and the work required in your home.

  1. Compare materials

    Bring cabinet and flooring ideas to the Kirkland Design Center. Compare surface samples, undertones, pattern scale, finish and care expectations.

  2. Select the product or slab

    Confirm the manufacturer, design, finish and thickness. For natural stone, review the actual slabs; photographs and small samples cannot show every variation.

  3. Confirm scope & template

    Agree the scope, then coordinate a field template when cabinets and site conditions are ready. Final sink, faucet and appliance specifications are needed.

  4. Approve fabrication details

    Review layout, seams, edge profiles, cutouts, backsplash and waterfall details. Confirm product availability and fabrication timing before scheduling installation.

  5. Install & complete connections

    Coordinate delivery, access, protection and the agreed installation work. Plumbing, electrical and other connections follow the responsibilities in your project scope.

  6. Review care & handover

    Walk through the installed work and receive the selected material’s care guidance and applicable warranty information.

Live well with your selection

Choose with care in mind.

Discuss the upkeep you are comfortable with before selecting a surface. Review cleaning products, spill care, sealing where applicable, and protection around heat and cutting tasks.

Keep the manufacturer, collection, finish and installation records with your project documents. Product and workmanship coverage follow the applicable written terms.

Compare samples at the Design Center →

Frequently asked questions

Useful answers before you begin.

Is quartz the same material as quartzite?+

No. Quartzite is a natural stone. Quartz and other engineered countertop surfaces are manufactured products; their ingredients and performance vary by brand and collection. We keep those categories separate when comparing products.

Can I match countertops with my cabinets and backsplash?+

Yes. Bring cabinet finishes and flooring ideas to the Design Center so you can review undertones, pattern scale and texture together. Confirm the final surface with physical samples and, where appropriate, the actual slab.

Can every porcelain slab be used for a countertop?+

No. Use only a product approved for that application and a suitable supporting assembly. The selected slab’s dimensions, thickness, finish, edge and fabrication instructions determine the details.

Will the countertop match the photograph exactly?+

Photographs are selection references. Lighting and screens change color, natural stone varies between slabs, and manufactured patterns can vary across the full surface. Approve the physical material and fabrication layout before work begins.

What affects the countertop estimate?+

Material, quantity, slab layout, removal, access, templates, fabrication, edge profiles, cutouts, seams, backsplash, waterfall ends and required supporting work all affect the scope. Your written proposal identifies what is included.

How should I care for my countertop?+

Follow the selected manufacturer’s care instructions. Use appropriate cleaners, cutting boards and heat protection. Some natural stone needs sealing; engineered surfaces and porcelain have their own guidance. Avoid treating every surface as having the same care requirements.

Are the listed products in stock at the Design Center?+

This catalog is for material selection, not a live LeviArs inventory. Confirm samples, current availability, lead times, slab dimensions and project suitability with our team before ordering.

What is the difference between quartz and quartzite?+

Quartz is generally engineered; quartzite is a natural stone. Care and performance are product-specific.

When are countertops measured?+

Final templating generally follows cabinet installation and confirmation that supports are ready.

Let’s plan your surface

Request a countertop consultation.

Tell us your project city and whether you are planning kitchen counters, a bathroom vanity, a backsplash or a coordinated remodel. Include the manufacturer and design names you would like to discuss in Project Details.

Open form in a new tab ↗

Your request is sent securely through this form. Preferred dates and times are not confirmed until a LeviArs team member contacts you. Read our Privacy Policy.